Lifting and transportation

The lifting and positioning of the water wheel rotary transfer machine shall use the special lifting tools provided by the manufacturer, and other methods are not allowed. Do not need special lifting tools, should use wire rope in accordance with the instructions to lift and position.

Foundation and location

water wheel rotary transfer machine should be installed on a firm foundation, the position should be far away from the vibration source; Avoid sunlight and heat radiation; Store in a dry place to avoid moisture and airflow. If there is a vibration source near the water wheel rotary transfer machine, install anti-vibration trenches around the foundation.

Installation of water wheel rotary transfer machine

The water wheel rotary transfer machine is placed on the foundation, and should be levelled in a free state, and then the anchor bolts are evenly locked. For ordinary water wheel rotary transfer machine, the level reading does not exceed 0.04/1000mm, for high-precision water wheel rotary transfer machine, the level does not exceed 0.02/1000mm. When measuring the installation accuracy, it should be carried out at a constant temperature, and the measurement tool should be used after a fixed temperature period. When installing the water wheel rotary transfer machine, efforts should be made to avoid the installation method that causes forced deformation of the water wheel rotary transfer machine. When installing the water wheel rotary transfer machine, do not remove some parts of the water wheel rotary transfer machine. The removal of components may result in the redistribution of the internal stress of the water wheel rotary transfer machine, thus affecting the accuracy of the water wheel rotary transfer machine.

Preparation before commissioning

water wheel rotary transfer machine After the geometric accuracy test is qualified, the whole machine needs to be cleaned. Use cotton or silk cloth impregnated with cleaning agent, not cotton or gauze. Clean off the anti-rust oil or anti-rust paint applied by the water wheel rotary transfer machine to protect the guide rail surface and processing surface. Clean the dust on the outer surface of the water wheel rotary transfer machine. Grease each sliding surface and working surface with water wheel rotary transfer machine.

Carefully check whether all parts of the water wheel rotary transfer machine are filled with oil as required, and whether enough coolant is added to the cooling box. water wheel rotary transfer machine hydraulic station, automatic lubrication device oil to the oil level indicator specified parts.

Check whether the switches and components in the electrical control box are normal, and whether the integrated circuit board is in place.

Energized start centralized lubrication assembly, so that each lubricating part and lubricating oil path filled with lubricating oil. Prepare all components of the water wheel rotary transfer machine for action.

water wheel rotary transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html